Wolf Tooth Components
Bash Ring (104 BCD)

The 104 BCD bashring can be added to the crankset to protect a 104 or 64 BCD chainring.

Properly sized to fit 104 or 64 BCD chainring

Two sizes for ultimate protection: smaller 26-30t (132 mm diameter) and mid-sized 32t-34t (148 mm diameter). 

Compatibility:

• These are for use with 104 BCD chainrings or 64 BCD chainrings on 104 BCD cranksets
• These are compatible with all triple 104 BCD cranksets and mount in the “big ring” position
• They are compatible with double cranksets that have flat outfacing mounting tabs, like XTR M980. However, many 2x specific cranks, like Shimano XT M785, have a profiled outer surface on the mounting tab so our bashring cannot be mounted on that non-flat surface.
• These work great with the 104 BCD Elliptical 32t ring. They will work with the 34t as well, but at the max diameter a few teeth will extend just beyond the bashring.
• Chainring bolt requirements for this bashring
• 104 x 30t - 10mm bolts are required for use with the bashring.
• Other 104 BCD sizes - you will need 8mm bolts (stock size that comes on 3x cranksets holding the middle and big rings on). Wolf Tooth does not make these.
• When using with the 64 BCD you will need 6mm bolts to mount the bashring. Note: Orient the head of the bolt to the inside to provide clearance for the chain (bolts will go in backwards).

Tech Specs:

• Weight:  26-30t - 51g  |  32-34t - 55g
• Material:  7075-T6 aluminum
• Outside diameter:  26-30t - 132 mm  |  32-34t - 148 mm
• Made in the USA