WMBB386SRAM

Wheels Manufacturing
386EVO to 24/22mm Crank Spindle Shims

£50.99  
Was  £55.99   | Save  £5.00   (9%)

Run SRAM cranks in your 386EVO frame

  • Shims are based on industry standard 386EVO bottom bracket shells
  • 386EVO is a 22mm-wider version of PressFit 30, using the same cups, straight 46mm bore and 30mm spindle diameter but in an 86.5mm-wide shell
  • Easy to install and machined for exact fit
  • Shims press fit directly into 386EVO bearings (6806 30mm ID bearings)
  • You will need the 386EVO bearings already installed into the 386EVO shell to start this conversion
  • Removal is the opposite of installation
  • You may need to gently tap them out from the opposite side

Run SRAM cranks in your 386EVO frame

  • Shims are based on industry standard 386EVO bottom bracket shells
  • 386EVO is a 22mm-wider version of PressFit 30, using the same cups, straight 46mm bore and 30mm spindle diameter but in an 86.5mm-wide shell
  • Easy to install and machined for exact fit
  • Shims press fit directly into 386EVO bearings (6806 30mm ID bearings)
  • You will need the 386EVO bearings already installed into the 386EVO shell to start this conversion
  • Removal is the opposite of installation
  • You may need to gently tap them out from the opposite side

Logo Line Break