TH-HB-E135

Thomson
Carbon 35 Handlebars

£176.00  
Was  £195.00   | Save  £19.00   (10%)
Bar Width
Colour
Rise

800mm wide, offering 10mm and 20mm of centre rise together with a 9° backsweep and 5° upsweep. Built for strength with enough flex built in for all day comfort. Strong enough for all mountain/trail riding and light enough for racing.

The bars are made with three different fibre types with different tensile strength and tensile modulus, including high strength carbon fibres. This helps to allocate stiffness and flex where needed.

The bars are moulded with an EPS mandrel inside to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflated nylon bladders.

All carbon fibre material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre to Boeing and Airbus.

1.5K woven impact ends help prevent damage to unidirectional fibres from shortening the bar or impact with the ground. With a lightweight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+.

Features:

  • Centre Rise: 10mm and 20mm options.
  • Backsweep: 9 degrees.
  • Upsweep: 5 degrees.
  • Toray Triple Carbon blend.
  • Moulded with EPS mandrel, improves internal layup.
  • Nano Epoxy Resin for very high impact resistance.

800mm wide, offering 10mm and 20mm of centre rise together with a 9° backsweep and 5° upsweep. Built for strength with enough flex built in for all day comfort. Strong enough for all mountain/trail riding and light enough for racing.

The bars are made with three different fibre types with different tensile strength and tensile modulus, including high strength carbon fibres. This helps to allocate stiffness and flex where needed.

The bars are moulded with an EPS mandrel inside to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflated nylon bladders.

All carbon fibre material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre to Boeing and Airbus.

1.5K woven impact ends help prevent damage to unidirectional fibres from shortening the bar or impact with the ground. With a lightweight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+.

Features:

  • Centre Rise: 10mm and 20mm options.
  • Backsweep: 9 degrees.
  • Upsweep: 5 degrees.
  • Toray Triple Carbon blend.
  • Moulded with EPS mandrel, improves internal layup.
  • Nano Epoxy Resin for very high impact resistance.

Logo Line Break