Tacx
Flux 2 Smart Trainer

FLUX 2 Smart

The iconic FLUX Smart has been upgraded to the FLUX 2 Smart. Compared to its predecessor, it is equipped with a bigger and stronger resistance unit and a heavier flywheel. This resulted in a wider simulation range, better ride feel and a more accurate power measurement.

FEATURES 

• Type of trainer - Interactive Smart direct drive with electric brake
• Magnets - 8 Permanent ferrite magnets & 8 electromagnets
• Transmission - None
• Electrical requirements - 110-240 Volt
• Power indicator - None
• Connection indicator(ANT/BT) - 2 LEDs
• Firmware upgradable - Yes
• Suitable cassettes - Shimano & SRAM: 8 t/m 11 speed. Campagnolo body sold separately
• Suitable axles - Width of rear fork: Race 130 mm, MTB 135 mm, 142 mm & 148 mm. Adapter for 135 x 10 mm available.
• Suitable bikes - Race, Tri & MTB
• Supplied with - Quick release for road bikes and mountain bikes (5mm) , Direct drive quick release with adapter set 142x12mm , 1 month Tacx Premium software

SPECIFICATIONS 

• Max. power (40 km/h) - 2000 Watt
• Max. incline - 16%
• Simulation of descent - No
• Max. torque - 41 Nm
• Max. brake force - 120 N
• Flywheel - Actual of 7.6 kg
• Mass inertia - 31.2kg
• Calibration - Spin down
• Footprint(lxw) - 670 x 642 mm (26.4 x 25.3 in)
• Height - 460 mm (18.1 in)
• Dimensions when folded - Not foldable
• Weight - 23.6kg (52lbs)
• Article number - T2980

DATA OUTPUT AND CONTROL 

• Wireless communication - ANT+ FE-C, Bluetooth Smart open
• Control by - Smartphone, Tablet, ANT+FE-C bike computers, Stand alone, Connect to computer via ANT+antenna
• Output - Speed, Cadence, Power
• Read out on - Smartphone, Tablet, Bike computer, Sports watch, Computer with ANT+ antenna
• Accuracy - <2.5%
/ul>