ZoomSurly
Bridge Club Frameset - Whipped Butter
- Spread the cost over 12, 24 or 36 months
- Pay as little as 10% deposit
- Change your repayment terms at any point
- Same day finance decision
Bridge Club is for those multi-surface outings — planned or unplanned. We've all run out the clock on a dirt tour and had to add in some paved shortcuts. Conversely, when you’re feeling a little zesty on your next road tour, Bridge Club is ready for reroutes through the woods.
Some people hear "bike touring" and immediately think of long-forgotten stretches of highway, small-town oddities, and roadside attractions. Some instantly recall desolate stretches of desert dirt roads or lush green forest trails. With Bridge Club, you can have your dessert and eat it too!
- Ultra-focused on simplicity, it only has the barnacles that matter most to the discerning bike tourist
- Two build kit options: Pavement (700c) and Off-Road (27.5)
- Run racks and panniers, framebags, or all of the above
- Disc brake-specific, single position vertical rear dropout makes it less intimidating than other bikes in the category
- Clearance for 700 x 47mm tyres (with or without mudguards), 27.5 x 2.8” tyres (27.5 x 2.6” with mudguards), and 26 x 3” tyres (26 x 2.8” with mudguards)
Specification:
Frame Construction: 4130 Chromoly, Natch tubing, double-butted main triangle, TIG welded, ED coated
Fork Construction: 4130 Chromoly, Natch tubing, double-butted tapered fork blades, TIG welded, ED coated
Rear Dropout Configuration: Vertical
Rear Hub Spacing: "Gnot-Boost" 138mm/ 10 x 135mm or 10 x 141mm
Front Hub Spacing: 10 x 100mm
Rear Brake: Disc - 51mm I.S. (180mm max rotor)
Front Brake: Disc - 51mm I.S. (203mm max rotor)
Head Tube: Ø34mm
Steerer Tube: Ø28.6mm (1-1/8")
Crown Race: Ø30mm (1-1/8")
Stock Headset Upper (S.H.I.S.): EC34/28.6
Stock Headset Lower (S.H.I.S.): EC34/30
Seat Collar: Ø30mm
Seatpost: Ø27.2mm
Front Derailleur (Clamp): High direct mount top-pull (Ø28.6mm)/ 26mm offset adapter (not included) for 135mm rear hub spacing/ 29mm offset adapter (not included) for 141mm rear hub spacing
Max Chainring (CL): 1x (Mtn): 34T/ 2x (Mtn): 26/40T/ 3x (Mtn): 22/36/44T/ 1x (Boost): 40T/ 2x (Boost): 32/42T
Bottom Bracket: 73mm threaded (1.37" x 24TPI)
Tire Clearance Frame: 26 x 3.0" (26 x 2.8" with fenders)/ 27.5 x 2.8" (27.5 x 2.6" with fenders)/ 700c x 47 with or without fenders
Tire Clearance Fork: 26 x 3.0" (26 x 2.8" with fenders)/ 27.5 x 2.8" (27.5 x 2.6" with fenders)/ 700c x 47 with or without fenders
Rigid Fork Spec: 420 x 43mm
Max Suspension Fork Length: N/A
Bottle Mounts Frame: 2 Three-Pack (XS)/ 1 Standard + 2 Three-Pack (S - XL)
Bottle Mounts Fork: 2 Three-Pack
Rack Mounts Frame: Yes (upper and lower threaded)
Rack Mounts Fork: Yes (upper, lower, and mid-blade threaded)
Fender Mounts Frame: Yes
Fender Mounts Fork: Yes
Bridge Club is for those multi-surface outings — planned or unplanned. We've all run out the clock on a dirt tour and had to add in some paved shortcuts. Conversely, when you’re feeling a little zesty on your next road tour, Bridge Club is ready for reroutes through the woods.
Some people hear "bike touring" and immediately think of long-forgotten stretches of highway, small-town oddities, and roadside attractions. Some instantly recall desolate stretches of desert dirt roads or lush green forest trails. With Bridge Club, you can have your dessert and eat it too!
- Ultra-focused on simplicity, it only has the barnacles that matter most to the discerning bike tourist
- Two build kit options: Pavement (700c) and Off-Road (27.5)
- Run racks and panniers, framebags, or all of the above
- Disc brake-specific, single position vertical rear dropout makes it less intimidating than other bikes in the category
- Clearance for 700 x 47mm tyres (with or without mudguards), 27.5 x 2.8” tyres (27.5 x 2.6” with mudguards), and 26 x 3” tyres (26 x 2.8” with mudguards)
Specification:
Frame Construction: 4130 Chromoly, Natch tubing, double-butted main triangle, TIG welded, ED coated
Fork Construction: 4130 Chromoly, Natch tubing, double-butted tapered fork blades, TIG welded, ED coated
Rear Dropout Configuration: Vertical
Rear Hub Spacing: "Gnot-Boost" 138mm/ 10 x 135mm or 10 x 141mm
Front Hub Spacing: 10 x 100mm
Rear Brake: Disc - 51mm I.S. (180mm max rotor)
Front Brake: Disc - 51mm I.S. (203mm max rotor)
Head Tube: Ø34mm
Steerer Tube: Ø28.6mm (1-1/8")
Crown Race: Ø30mm (1-1/8")
Stock Headset Upper (S.H.I.S.): EC34/28.6
Stock Headset Lower (S.H.I.S.): EC34/30
Seat Collar: Ø30mm
Seatpost: Ø27.2mm
Front Derailleur (Clamp): High direct mount top-pull (Ø28.6mm)/ 26mm offset adapter (not included) for 135mm rear hub spacing/ 29mm offset adapter (not included) for 141mm rear hub spacing
Max Chainring (CL): 1x (Mtn): 34T/ 2x (Mtn): 26/40T/ 3x (Mtn): 22/36/44T/ 1x (Boost): 40T/ 2x (Boost): 32/42T
Bottom Bracket: 73mm threaded (1.37" x 24TPI)
Tire Clearance Frame: 26 x 3.0" (26 x 2.8" with fenders)/ 27.5 x 2.8" (27.5 x 2.6" with fenders)/ 700c x 47 with or without fenders
Tire Clearance Fork: 26 x 3.0" (26 x 2.8" with fenders)/ 27.5 x 2.8" (27.5 x 2.6" with fenders)/ 700c x 47 with or without fenders
Rigid Fork Spec: 420 x 43mm
Max Suspension Fork Length: N/A
Bottle Mounts Frame: 2 Three-Pack (XS)/ 1 Standard + 2 Three-Pack (S - XL)
Bottle Mounts Fork: 2 Three-Pack
Rack Mounts Frame: Yes (upper and lower threaded)
Rack Mounts Fork: Yes (upper, lower, and mid-blade threaded)
Fender Mounts Frame: Yes
Fender Mounts Fork: Yes
