ZoomSilca
3D Printed Ti Cerakote Dead Blow Hammer
- Spread the cost over 6, 10, 12, 24 or 36 months
- 0% Finance on 6 and 10 month options
- Pay as little as 10% deposit (20% for interest free options)
- Change your repayment terms at any point
- Same day finance decision
Every pro mechanic we know carries a machinist hammer, and over the years, most of these have gone titanium to save weight in the tool case. This hammer is 3D printed in hardened 6/4 Titanium with a hollow head that we fill with 125 grams of fine stainless steel and fine tungsten grit, giving it higher impact energy than a solid titanium head, while also eliminating any recoil. The hammer head is hard titanium on one side and medium hard rubber on the other for use on delicate surfaces.
Every pro mechanic we know carries a machinist hammer, and over the years, most of these have gone titanium to save weight in the tool case. This hammer is 3D printed in hardened 6/4 Titanium with a hollow head that we fill with 125 grams of fine stainless steel and fine tungsten grit, giving it higher impact energy than a solid titanium head, while also eliminating any recoil. The hammer head is hard titanium on one side and medium hard rubber on the other for use on delicate surfaces.
