ZoomPrevelo
Alpha One Kids Bike - Blue
- Spread the cost over 12, 24 or 36 months
- Pay as little as 10% deposit
- Change your repayment terms at any point
- Same day finance decision
Loaded with Features Obsessively Thought Out for Kids
Kid Optimized Crank
Prevelo crank lengths are custom sized for each size bike to make sure little riders have optimum pedal ergonomics. And they have ultra-narrow Q-factors to match the narrow hips of young cyclists. If that sounds like technical mumbo jumbo, here's the point - Prevelo cranks will help make small riders more comfortable and efficient on their bike.
BOXT Rear Stays and Forged Dropouts
Kids are going to put their bikes through the ringer, so Prevelo bikes are built kid tough with robust BOXT rear chainstays and seat stays, and BMX track style forged dropouts that shroud the rear axle.
Confidence Inspiring Geometry
The Alpha One features Prevelo's signature confidence inspiring geometry. Prevelo geometry utilizes a low bottom bracket that lowers the center of gravity of the bike and rider, making for a more agile and confident ride.
Kid Friendly Hubs
The hubs are equipped with rounded axle bolts that minimize hard edges. And because kids are going to run their bikes through muck, the hubs have rubber seals to keep out dirt and grime.
Kid Optimized Cockpit
This is where little riders command these steed. It's decked out with ultra small diameter grips and short reach brake levers that are optimized for small hands.
Low Standover Height
A low minimum seat height and dropped top tube help accomodate the smallest riders.
Wheel Size: 14"
Age: ~3 to 5 years
Inseam: 14" - 16½"
Features
- Prevelo confidence inspiring low and narrow geometry. Prevelo geometry keeps the rider low, balanced and in control.
- Lightweight 6061 aluminum frame with custom formed tubing.
- Lightweight aluminum alloy fork with chromoly steerer.
- Front and rear v-brakes with small reach brake levers.
- Front hub with low profile rounded hex bolts and no harsh edged nuts for little legs to knock against.
- Three piece crank with squared taper cartridge bearing bottom bracket and ultra narrow Q factor.
- Double chain wheel guard.
- Custom made cranks. All Prevelo cranks are sized specifically for each model bike, down to the millimeter.
- 95% assembled. Just install the handlebar, seatpost and pedals.
Measurements
Weight (including pedals): 14.4 lbs / 6.5 kg (13.45 lbs / 6.1 kg with freewheel kit installed)
Minimum Saddle Height: 15.6 in / 397 mm
Maximum Saddle Height: 17.5 in / 445 mm
Bottom Bracket Height: 6.7 in / 170 mm
Gain Ratio: 3.7
Specifications
Frame: 6061 heat treated aluminium alloy custom formed tubing
Fork: aluminium alloy blades with chromoly steerer tube - 35mm rake
Seat clamp: aluminium alloy with toolless adjustment
Front brake: aluminium v-brake
Rear brake: aluminium v-brake
Front brake lever: aluminium short reach
Rear brake lever: aluminium short reach
Crank set: prevelo anodized alloy 3-piece square taper with 85mm crank length.
Sprocket: 25t with double chain ring guard
Bb set: sealed cartridge
Head set: 1 1/8" threadless
Rim: aluminium with grinded sidewalls
Front hub: lightweight alloy 1-piece forged cnc with low profile rounded hex bolts
Rear hub: steel - 14t cog
Tyre & tube: kenda small block eight pro 14 ×1.5
Saddle: prevelo small kid saddle
Handlebar: prevelo aluminium - 470mm wide x 50mm rise - 22.2mm to 19mm taper
Handlebar stem: aluminium 30mm extension
Grip: kraton rubber
Pedal: composite with 9/16 chromoly axle* specifications are subject to change without notice
Loaded with Features Obsessively Thought Out for Kids
Kid Optimized Crank
Prevelo crank lengths are custom sized for each size bike to make sure little riders have optimum pedal ergonomics. And they have ultra-narrow Q-factors to match the narrow hips of young cyclists. If that sounds like technical mumbo jumbo, here's the point - Prevelo cranks will help make small riders more comfortable and efficient on their bike.
BOXT Rear Stays and Forged Dropouts
Kids are going to put their bikes through the ringer, so Prevelo bikes are built kid tough with robust BOXT rear chainstays and seat stays, and BMX track style forged dropouts that shroud the rear axle.
Confidence Inspiring Geometry
The Alpha One features Prevelo's signature confidence inspiring geometry. Prevelo geometry utilizes a low bottom bracket that lowers the center of gravity of the bike and rider, making for a more agile and confident ride.
Kid Friendly Hubs
The hubs are equipped with rounded axle bolts that minimize hard edges. And because kids are going to run their bikes through muck, the hubs have rubber seals to keep out dirt and grime.
Kid Optimized Cockpit
This is where little riders command these steed. It's decked out with ultra small diameter grips and short reach brake levers that are optimized for small hands.
Low Standover Height
A low minimum seat height and dropped top tube help accomodate the smallest riders.
Wheel Size: 14"
Age: ~3 to 5 years
Inseam: 14" - 16½"
Features
- Prevelo confidence inspiring low and narrow geometry. Prevelo geometry keeps the rider low, balanced and in control.
- Lightweight 6061 aluminum frame with custom formed tubing.
- Lightweight aluminum alloy fork with chromoly steerer.
- Front and rear v-brakes with small reach brake levers.
- Front hub with low profile rounded hex bolts and no harsh edged nuts for little legs to knock against.
- Three piece crank with squared taper cartridge bearing bottom bracket and ultra narrow Q factor.
- Double chain wheel guard.
- Custom made cranks. All Prevelo cranks are sized specifically for each model bike, down to the millimeter.
- 95% assembled. Just install the handlebar, seatpost and pedals.
Measurements
Weight (including pedals): 14.4 lbs / 6.5 kg (13.45 lbs / 6.1 kg with freewheel kit installed)
Minimum Saddle Height: 15.6 in / 397 mm
Maximum Saddle Height: 17.5 in / 445 mm
Bottom Bracket Height: 6.7 in / 170 mm
Gain Ratio: 3.7
Specifications
Frame: 6061 heat treated aluminium alloy custom formed tubing
Fork: aluminium alloy blades with chromoly steerer tube - 35mm rake
Seat clamp: aluminium alloy with toolless adjustment
Front brake: aluminium v-brake
Rear brake: aluminium v-brake
Front brake lever: aluminium short reach
Rear brake lever: aluminium short reach
Crank set: prevelo anodized alloy 3-piece square taper with 85mm crank length.
Sprocket: 25t with double chain ring guard
Bb set: sealed cartridge
Head set: 1 1/8" threadless
Rim: aluminium with grinded sidewalls
Front hub: lightweight alloy 1-piece forged cnc with low profile rounded hex bolts
Rear hub: steel - 14t cog
Tyre & tube: kenda small block eight pro 14 ×1.5
Saddle: prevelo small kid saddle
Handlebar: prevelo aluminium - 470mm wide x 50mm rise - 22.2mm to 19mm taper
Handlebar stem: aluminium 30mm extension
Grip: kraton rubber
Pedal: composite with 9/16 chromoly axle* specifications are subject to change without notice
