Praxis Works Direct Mount B MTN Wave 1x Chainring (Boost)

Tough enough for Enduro, Downhill, and also weight conscious for XC riding, Praxis MTN Wave™ rings are machined from 7075 T6 aluminium and hard anodized to take a beating. Licensed and developed in conjunction with Mountain Racing Products, the Wave™ pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring – going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave™ design also wears more slowly than competing designs by spreading the load over larger surface areas.

Features:

• For Praxis Direct Mount MTB cranks or 3-Bolt SRAM MTB cranks
• Stamped and machined manufacturing with hard black anodizing for durability
• Wave™ Tech alternating tooth profile for better chain retention

Specification:

• For Praxis Direct Mount MTB cranks or 3-Bolt SRAM MTB cranks.
• 28, 30, 32, 34, 36T | 7075-T6 – See guide for DMA/DMB chain lines!
• Wave™ Tech alternating tooth profile for better chain retention.
• 10/11sp Shimano/SRAM | 12sp SRAM Compatible.
• Stamped and machined manufacturing with hard black anodizing for durability.
• REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2.
• In very rough terrain, or just for pure security, we still recommend use of an upper guide.

WESTBROOK CYCLES DELIVERY NOTICE

UK Deliveries
FREE when you spend over £50.00 in a single order
Otherwise it's typically £3.99 per order
Delivery should be expected between 2-3 working days unless stated on product page.

Worldwide Deliveries*
Approximately 4-10 working days depending on country
via Parcelforce Signed Delivery (fully traceable service). Please add items to the basket to calculate delivery for desired country.

If your country isn't listed for delivery at checkout please contact us.

Delivery of Bikes
We ship all our bikes free of charge within the United Kingdom (excl. Jersey and the Channel Islands at this time) and all our bikes come pre-assembled with just a few tweaks required (Please see our Bike Build Instruction page for details of assembly required).

All our bikes undergo a safety check before being re-boxed for shipping which can during busy periods take a little longer to complete so whilst we aim to ship all our bikes within two working days of the order please allow for additional time for this process.

Signature Required
All our consignments irrespective of the carrier require a signature upon delivery, deliveries are typically made between 08:00 and 18:00 so please bare this in mind when choosing a delivery address.

Package Recycling
We do try when possible to reuse packaging from our own suppliers in order to send purchased items to our customers, we ask if the packaging is still in good condition after you've received your goods then please try to use it again or recycle if not possible.