Designed to be a proper BB for installing M30 spindle based cranks in either BB30, PF30, or Specialized’s OSBB frames. Our patent pending design keeps the cartridge bearings outboard of the frame right on Shimano™ spec for greater rigidity and free of frame/c-clip tolerance issues that other systems deal with.
Simply press in the longer non-drive-cup, then the shorter drive cup threads into it. As the drive cup threads in, our trademark Collet system expands to a precise limit evenly dispersing pressure for a super tight fit. With both cups connected and our collet set exactly to spec, there is no chance the bearings can come out of alignment or wiggle/walk out of the frame. This design also uses a compressible o-ring on the non-drive side cup to compensate for frame shell width discrepancies.
For M30 Spindle based cranks only.
Forged & machined heat-treated 7075 T6 AL Cups
Steel cartridge bearings
68mm Road version / 73mm MTB Version
For BB86/92, BB30, PF30, and Specialized Road OSBB Aluminium frames
Not for BBRight or BB386EVO frames
68mm cannot be used for MTB Cranks
MTB Guides -ISCG05 & ST Mounted Good, ISCG03 Not Good
BB86/92 frames need to be check with the frame gauge before fitting
TECHNOLOGY & NOTES
WESTBROOK CYCLES DELIVERY NOTICE
FREE when you spend over £50.00 in a single order
Otherwise it's typically £3.99 per order
Delivery should be expected between 2-3 working days unless stated on product page.
Approximately 4-10 working days depending on country
via Parcelforce Signed Delivery (fully traceable service). Please add items to the basket to calculate delivery for desired country.
If your country isn't listed for delivery at checkout please contact us.
Delivery of Bikes
We ship all our bikes free of charge within the United Kingdom (excl. Jersey and the Channel Islands at this time) and all our bikes come pre-assembled with just a few tweaks required (Please see our Bike Build Instruction page for details of assembly required).
All our bikes undergo a safety check before being re-boxed for shipping which can during busy periods take a little longer to complete so whilst we aim to ship all our bikes within two working days of the order please allow for additional time for this process.
All our consignments irrespective of the carrier require a signature upon delivery, deliveries are typically made between 08:00 and 18:00 so please bare this in mind when choosing a delivery address.
We do try when possible to reuse packaging from our own suppliers in order to send purchased items to our customers, we ask if the packaging is still in good condition after you've received your goods then please try to use it again or recycle if not possible.