PR-68-3101

Praxis Works
68mm Campy UltraTorque BB30/PF30 Bottom Bracket Converter

ÂŁ59.00  
Was  ÂŁ65.00   | Save  ÂŁ6.00   (9%)
Colour

The Praxis Campagnolo bottom bracket converters UltraTorque is designed as a proper bottom bracket BB for installing Campagnolo Ultra Torque cranks in either BB30, PF30, or Specialized’s OSBB frames. Our patent pending design keeps the bearings outboard of the frame right on Campagnolo spec for greater rigidity and free of frame/c-clip tolerance issues that other systems deal with.

Simply press in the longer non-drive-cup, then the shorter drive cup threads into it. As the drive cup threads in, our trademark Collet system expands to a precise limit evenly dispersing pressure for a super tight fit. With both cups connected and our collet set exactly to spec, there is no chance the bearings can come out of alignment or wiggle/walk out of the frame. This design also uses a compressible o-ring on the non-drive side cup to compensate for frame shell width discrepancies.

  • For Campagnolo UltraTorque cranks only
  • Forged & machined heat-treated 7075 T6 Aluminium
  • 68mm Road
  • For BB30, PF30, and Specialized Road OSBB frames only
  • Non drive wavy washer and drive side outer clip included
  • Bearings not included as they are pressed on your Campy ULT crank

The Praxis Campagnolo bottom bracket converters UltraTorque is designed as a proper bottom bracket BB for installing Campagnolo Ultra Torque cranks in either BB30, PF30, or Specialized’s OSBB frames. Our patent pending design keeps the bearings outboard of the frame right on Campagnolo spec for greater rigidity and free of frame/c-clip tolerance issues that other systems deal with.

Simply press in the longer non-drive-cup, then the shorter drive cup threads into it. As the drive cup threads in, our trademark Collet system expands to a precise limit evenly dispersing pressure for a super tight fit. With both cups connected and our collet set exactly to spec, there is no chance the bearings can come out of alignment or wiggle/walk out of the frame. This design also uses a compressible o-ring on the non-drive side cup to compensate for frame shell width discrepancies.

  • For Campagnolo UltraTorque cranks only
  • Forged & machined heat-treated 7075 T6 Aluminium
  • 68mm Road
  • For BB30, PF30, and Specialized Road OSBB frames only
  • Non drive wavy washer and drive side outer clip included
  • Bearings not included as they are pressed on your Campy ULT crank

Logo Line Break