free delivery on UK orders over £50 | need help or advice? call 01642 710 232 | price promise - enquire today

Muc-Off Tubeless Valve Kit

Code: MO-1051
  • £19.99
  • RRP £22.50
In Stock at Warehouse | Shipped in 3-5 days
Loading...
Pay Now Smoooth checkout with Klarna
Slice It In 3 Pay in 3 instalments
Pay Later Buy now, pay up to 30 days later
PayPal Express Pay with your PayPal account

We know how frustrating it is to have a leaky tubeless valve that just doesn't seal! So we set about designing and making our own premium tubeless valves to solve the hassle of finding your tyre flat every time you go to ride.

Features

  • 6061 Aluminum machined stem.
  • 6061 Aluminum machined cap.
  • 4mm machined Allen Key slot for easy installation / removal.
  • Includes Valve Core Removal Tool (intergrated into spare alloy cap).
  • Assortment of 8 eye popping colours.

Directions for use

  1. Muc-Off Tubeless valves will work with most tubeless rims. If you are unsure, please refer to your rim manufacturer's instructions to check which tubeless valves will work for your rims.
  2. Firstly, remove the valve cap, locking ring and o-ring from the valve stem.
  3. Then choose the correct rubber base for your rim type. Rims with a curved rim section will use the circular rubber base. Rims with a square rim section will use the square rubber base. Slot this on down to the bottom of the valve stem. (If you find your rim has a larger valve hole and the smaller circular fitment is too loose, use the larger circular fitment to plug the hole).
  4. Now push the valve stem into the hole in the rim and push it right the way though. Then place the rubber 0-ring onto the valve stem and slide it all the way down until it meets the rim.
  5. Screw the locking ring onto the valve stem and tighten down above the o-ring. This sandwiches between the locking ring and the rim. Push firmly down on the valve base inside the rim as you tighten the locking ring. Keep pushing until the locking rick is hand tight and the rubber o-ring squashes out. This way you know you've created a good air tight seal. TIP - don't over tighten as this can cause leaking. Finish by screwing on your preferred valve cap.
  6. Use the valve core removal tool (integrated into spare alloy cap) to remove the core and fill with no puncture hassle tubeless sealant and inflate! Job Done.

WESTBROOK CYCLES DELIVERY NOTICE

UK Deliveries
FREE when you spend over £50.00 in a single order
Otherwise it's typically £3.99 per order
Delivery should be expected between 2-3 working days unless stated on product page.

Worldwide Deliveries*
Approximately 4-10 working days depending on country
via Parcelforce Signed Delivery (fully traceable service). Please add items to the basket to calculate delivery for desired country.

If your country isn't listed for delivery at checkout please contact us.

Delivery of Bikes
We ship all our bikes free of charge within the United Kingdom (excl. Jersey and the Channel Islands at this time) and all our bikes come pre-assembled with just a few tweaks required (Please see our Bike Build Instruction page for details of assembly required).

All our bikes undergo a safety check before being re-boxed for shipping which can during busy periods take a little longer to complete so whilst we aim to ship all our bikes within two working days of the order please allow for additional time for this process.

Signature Required
All our consignments irrespective of the carrier require a signature upon delivery, deliveries are typically made between 08:00 and 18:00 so please bare this in mind when choosing a delivery address.

Package Recycling
We do try when possible to reuse packaging from our own suppliers in order to send purchased items to our customers, we ask if the packaging is still in good condition after you've received your goods then please try to use it again or recycle if not possible.

Top