PR-28-4001-DMA-WAVE

Praxis Works
MTN Wave Direct Mount 1x Chainring

From  £50.00  
Was  £55.00   | Save  £5.00   (9%)
Chainline
Chainring Size
Colour

Tough enough for Enduro, Downhill, and also weight conscious for XC riding, Praxis MTN Wave™ rings are machined from 7075 T6 aluminum and hard anodized to take a beating. Licensed and developed in conjunction with Mountain Racing Products, the Wave™ pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring - going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave™ design also wears more slowly than competing designs by spreading the load over larger surface areas.

Specifications:

  • For Praxis Direct Mount MTB cranks or 3-Bolt SRAM MTB cranks
  • 28, 30, 32, 34, 36T | 7075-T6 - Please see guide for DM-A & DM-B chain lines!
  • Wave™ Tech alternating tooth profile for better chain retention
  • 10/11/12sp Shimano/KMC/SRAM
  • Stamped and machined manufacturing with hard black anodizing for durability
  • REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2
  • In very rough terrain, or just for pure security, we still recommend use of an upper guide

Tough enough for Enduro, Downhill, and also weight conscious for XC riding, Praxis MTN Wave™ rings are machined from 7075 T6 aluminum and hard anodized to take a beating. Licensed and developed in conjunction with Mountain Racing Products, the Wave™ pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring - going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave™ design also wears more slowly than competing designs by spreading the load over larger surface areas.

Specifications:

  • For Praxis Direct Mount MTB cranks or 3-Bolt SRAM MTB cranks
  • 28, 30, 32, 34, 36T | 7075-T6 - Please see guide for DM-A & DM-B chain lines!
  • Wave™ Tech alternating tooth profile for better chain retention
  • 10/11/12sp Shimano/KMC/SRAM
  • Stamped and machined manufacturing with hard black anodizing for durability
  • REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2
  • In very rough terrain, or just for pure security, we still recommend use of an upper guide

Logo Line Break