HUHATG4K

Halo
Fix-G Rear Track Hub

From  £76.99  
Was  £84.99   | Save  £8.00   (9%)
Colour
Freehub Type
Size

Renowned around the world by track racers, couriers and freestyle riders alike, our track series hubs run on Japanese sealed bearings for longevity and speed.

Drilled Cr-mo steel axles keep the weight down and strength up.

Utilising our renowned TK rear hub chassis, our FIX-G Rear hub improves on traditional standards.

The FIX-G rear hub uses an HG splined hub body, with sprockets that slide on and an independent lockring that never has to handle rotational forces from the drive.

Halo Fix-G advantages:

  • Easy and secure fixing and servicing.
  • Adjustable chainline - 41 to 52mm.
  • Accepts 12 - 20T sprockets.
  • No need for chainwhip tools.

Note: The HG spline must ONLY be used with 7mm wide "fat foot" sprockets such as Halo Fat Foot sprockets or Gusset Double Six sprocket to avoid the cog biting into the alloy splines on the hub. Regular width HG sprockets should NEVER be used.

Weights noted for track hubs include tracknuts at 32g

Specifications

Material: Alloy forged and CNC machined

Drillings: 32H, 36H or 48H depending on model

Axle: Hollow M10 Cr-Mo axle

Spoke Hole Circle Diameter (PCD): 62mm

Spoke hole size (diameter): 2.5mm

Centre to Flange: Left and Right: 31mm

Bearings: 2 x 6000 series Japanese sealed bearings.

OLD: 120mm

Renowned around the world by track racers, couriers and freestyle riders alike, our track series hubs run on Japanese sealed bearings for longevity and speed.

Drilled Cr-mo steel axles keep the weight down and strength up.

Utilising our renowned TK rear hub chassis, our FIX-G Rear hub improves on traditional standards.

The FIX-G rear hub uses an HG splined hub body, with sprockets that slide on and an independent lockring that never has to handle rotational forces from the drive.

Halo Fix-G advantages:

  • Easy and secure fixing and servicing.
  • Adjustable chainline - 41 to 52mm.
  • Accepts 12 - 20T sprockets.
  • No need for chainwhip tools.

Note: The HG spline must ONLY be used with 7mm wide "fat foot" sprockets such as Halo Fat Foot sprockets or Gusset Double Six sprocket to avoid the cog biting into the alloy splines on the hub. Regular width HG sprockets should NEVER be used.

Weights noted for track hubs include tracknuts at 32g

Specifications

Material: Alloy forged and CNC machined

Drillings: 32H, 36H or 48H depending on model

Axle: Hollow M10 Cr-Mo axle

Spoke Hole Circle Diameter (PCD): 62mm

Spoke hole size (diameter): 2.5mm

Centre to Flange: Left and Right: 31mm

Bearings: 2 x 6000 series Japanese sealed bearings.

OLD: 120mm

Logo Line Break