ZoomFox
32 AX Float Performance Elite FIT4 Tapered Fork - 700c (2024)
- Spread the cost over 6, 10, 12, 24 or 36 months
- 0% Finance on 6 and 10 month options
- Pay as little as 10% deposit (20% for interest free options)
- Change your repayment terms at any point
- Same day finance decision
Ground up gravel design, built on partner and athlete feedback, with Fox's proven FIT4 or GRIP damper options. Ditch the flex stem and undamped leaf-springs; suspending the bike greatly improves rider experience, takes the edge off extended gravel rides and dramatically expands the path you can take. From race day at Grinduro to the pockmarked service roads outside your back door, the 32 Taper-Cast is the evolution of gravel.
Features
- The lightest fork FOX has ever made (1226g)
- 40, 50 mm travel options
- FIT4 damper
- 700c chassis with clearance for large volume tires (50 mm max)
- Integrated full fender mounts (700c x 45 mm max with fender)
- Sleek crown profile for increased downtube clearance and frame compatibility
- Low-profile top caps for aesthetics and frame clearance
- Lightweight air spring optimized for short-travel
- Lower Leg Air/Oil Bypass Channels
- Sleek, low-profile top caps for aesthetics and frame clearance
- 1 ½" to 1.5" tapered steer tube
- 12 mm x 100 mm bolt-on thru-axle
- 45 and 50 mm rake options
- Flat Mount 160-180 mm rotor compatible
- Axle-to-crown 435.5 mm (40 mm travel) - 445.5 mm (50 mm travel)
- Performance Elite series
Ground up gravel design, built on partner and athlete feedback, with Fox's proven FIT4 or GRIP damper options. Ditch the flex stem and undamped leaf-springs; suspending the bike greatly improves rider experience, takes the edge off extended gravel rides and dramatically expands the path you can take. From race day at Grinduro to the pockmarked service roads outside your back door, the 32 Taper-Cast is the evolution of gravel.
Features
- The lightest fork FOX has ever made (1226g)
- 40, 50 mm travel options
- FIT4 damper
- 700c chassis with clearance for large volume tires (50 mm max)
- Integrated full fender mounts (700c x 45 mm max with fender)
- Sleek crown profile for increased downtube clearance and frame compatibility
- Low-profile top caps for aesthetics and frame clearance
- Lightweight air spring optimized for short-travel
- Lower Leg Air/Oil Bypass Channels
- Sleek, low-profile top caps for aesthetics and frame clearance
- 1 ½" to 1.5" tapered steer tube
- 12 mm x 100 mm bolt-on thru-axle
- 45 and 50 mm rake options
- Flat Mount 160-180 mm rotor compatible
- Axle-to-crown 435.5 mm (40 mm travel) - 445.5 mm (50 mm travel)
- Performance Elite series
