T2980

Tacx
Flux 2 Smart Trainer

£629.99  
Was  £699.99   | Save  £70.00   (10%)
Finance available from £10.09 / month DEKO Finance
  • Spread the cost over 12, 24 or 36 months
  • Pay as little as 10% deposit
  • Change your repayment terms at any point
  • Same-day finance approval
Calculate finance

FLUX 2 Smart

The iconic FLUX Smart has been upgraded to the FLUX 2 Smart. Compared to its predecessor, it is equipped with a bigger and stronger resistance unit and a heavier flywheel. This resulted in a wider simulation range, better ride feel and a more accurate power measurement.

FEATURES 

  • Type of trainer - Interactive Smart direct drive with electric brake
  • Magnets - 8 Permanent ferrite magnets & 8 electromagnets
  • Transmission - None
  • Electrical requirements - 110-240 Volt
  • Power indicator - None
  • Connection indicator(ANT/BT) - 2 LEDs
  • Firmware upgradable - Yes
  • Suitable cassettes - Shimano & SRAM: 8 t/m 11 speed. Campagnolo body sold separately
  • Suitable axles - Width of rear fork: Race 130 mm, MTB 135 mm, 142 mm & 148 mm. Adapter for 135 x 10 mm available.
  • Suitable bikes - Race, Tri & MTB
  • Supplied with - Quick release for road bikes and mountain bikes (5mm) , Direct drive quick release with adapter set 142x12mm , 1 month Tacx Premium software

SPECIFICATIONS 

  • Max. power (40 km/h) - 2000 Watt
  • Max. incline - 16%
  • Simulation of descent - No
  • Max. torque - 41 Nm
  • Max. brake force - 120 N
  • Flywheel - Actual of 7.6 kg
  • Mass inertia - 31.2kg
  • Calibration - Spin down
  • Footprint(lxw) - 670 x 642 mm (26.4 x 25.3 in)
  • Height - 460 mm (18.1 in)
  • Dimensions when folded - Not foldable
  • Weight - 23.6kg (52lbs)
  • Article number - T2980

DATA OUTPUT AND CONTROL 

  • Wireless communication - ANT+ FE-C, Bluetooth Smart open
  • Control by - Smartphone, Tablet, ANT+FE-C bike computers, Stand alone, Connect to computer via ANT+antenna
  • Output - Speed, Cadence, Power
  • Read out on - Smartphone, Tablet, Bike computer, Sports watch, Computer with ANT+ antenna
  • Accuracy - <2.5%
  • /ul>

FLUX 2 Smart

The iconic FLUX Smart has been upgraded to the FLUX 2 Smart. Compared to its predecessor, it is equipped with a bigger and stronger resistance unit and a heavier flywheel. This resulted in a wider simulation range, better ride feel and a more accurate power measurement.

FEATURES 

  • Type of trainer - Interactive Smart direct drive with electric brake
  • Magnets - 8 Permanent ferrite magnets & 8 electromagnets
  • Transmission - None
  • Electrical requirements - 110-240 Volt
  • Power indicator - None
  • Connection indicator(ANT/BT) - 2 LEDs
  • Firmware upgradable - Yes
  • Suitable cassettes - Shimano & SRAM: 8 t/m 11 speed. Campagnolo body sold separately
  • Suitable axles - Width of rear fork: Race 130 mm, MTB 135 mm, 142 mm & 148 mm. Adapter for 135 x 10 mm available.
  • Suitable bikes - Race, Tri & MTB
  • Supplied with - Quick release for road bikes and mountain bikes (5mm) , Direct drive quick release with adapter set 142x12mm , 1 month Tacx Premium software

SPECIFICATIONS 

  • Max. power (40 km/h) - 2000 Watt
  • Max. incline - 16%
  • Simulation of descent - No
  • Max. torque - 41 Nm
  • Max. brake force - 120 N
  • Flywheel - Actual of 7.6 kg
  • Mass inertia - 31.2kg
  • Calibration - Spin down
  • Footprint(lxw) - 670 x 642 mm (26.4 x 25.3 in)
  • Height - 460 mm (18.1 in)
  • Dimensions when folded - Not foldable
  • Weight - 23.6kg (52lbs)
  • Article number - T2980

DATA OUTPUT AND CONTROL 

  • Wireless communication - ANT+ FE-C, Bluetooth Smart open
  • Control by - Smartphone, Tablet, ANT+FE-C bike computers, Stand alone, Connect to computer via ANT+antenna
  • Output - Speed, Cadence, Power
  • Read out on - Smartphone, Tablet, Bike computer, Sports watch, Computer with ANT+ antenna
  • Accuracy - <2.5%
  • /ul>

Logo Line Break