The Cyrano R3 is the high-end alloy seat post from fi'zi:k. Made Ergal Aluminium (7075-T6), this is both strong and lightweight. It is available in 2 diameters (27.2 and 31.6mm) and 2 lengths (270mm and 400mm) and designed to perfectly complement fi'zi:k Cyrano Handlebars and Stems.
These products are being ridden at UCI World Tour level by AG2R Pro Cycling Team.
This seat post clamp is easily adjusted and quick to install a saddle into.
The saddle clamp is designed specifically to be saddle rail-friendly, ensuring an even dispersal of the load once a saddle is clamped in place.
There is lots of fore-aft adjustment along the saddle rail as the top part of the clamp is shorter than the base.
The saddle clamp has a flat top with no screws protruding. This means there is no danger of reducing saddle comfort derived from a dynamic saddle base that might otherwise be restricted from moving.
The post can be used back to front, releasing the adjuster wheel all the way. This allows the rider to be closer to their bars in triathlon or time trials.
The round shaft is slightly ovalised, using thicker material fore and aft, thinner to each side. This optimal material distribution increases strength whilst keeping weight to a minimum.
All seat post clamp parts are heat-treated for 3 times the industry standard, making them particularly durable and corrosion-resistant.
Material: Ergal Aluminium (7075-T6)
Bolts: Stainless steel
Weight: 215g (31.6mm x 270mm)
WESTBROOK CYCLES DELIVERY NOTICE
FREE when you spend over £50.00 in a single order
Otherwise it's typically £3.99 per order
Delivery should be expected between 2-3 working days unless stated on product page.
Approximately 4-10 working days depending on country
via Parcelforce Signed Delivery (fully traceable service). Please add items to the basket to calculate delivery for desired country.
If your country isn't listed for delivery at checkout please contact us.
Delivery of Bikes
We ship all our bikes free of charge within the United Kingdom (excl. Jersey and the Channel Islands at this time) and all our bikes come pre-assembled with just a few tweaks required (Please see our Bike Build Instruction page for details of assembly required).
All our bikes undergo a safety check before being re-boxed for shipping which can during busy periods take a little longer to complete so whilst we aim to ship all our bikes within two working days of the order please allow for additional time for this process.
All our consignments irrespective of the carrier require a signature upon delivery, deliveries are typically made between 08:00 and 18:00 so please bare this in mind when choosing a delivery address.
We do try when possible to reuse packaging from our own suppliers in order to send purchased items to our customers, we ask if the packaging is still in good condition after you've received your goods then please try to use it again or recycle if not possible.