ZoomDynaplug
Bullet Tip Tubeless Tyre Repair Plugs (5 Pack)
5-pack of Dynaplug bullet brass tip repair plugs
Even gentler on your rim and tyre than the standard plugs, handy for very narrow, lightweight tyres or very thin rim tapes but slightly harder to insert as a result
Fit the same tools as our standard plugs
Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done!
The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape
No need to remove the tyre, no messy glues or solvents, just plug and ride!
If a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugs
A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the location!
Made with pride in the USA using patented technology
5-pack of Dynaplug bullet brass tip repair plugs
Even gentler on your rim and tyre than the standard plugs, handy for very narrow, lightweight tyres or very thin rim tapes but slightly harder to insert as a result
Fit the same tools as our standard plugs
Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done!
The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape
No need to remove the tyre, no messy glues or solvents, just plug and ride!
If a single plug is not enough to seal a hole, just fold the tail flat on the tyre; hold it with your finger and stick another one in there! Add as many plugs as needed, folding each tail against the tyre as you insert plugs
A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the location!
Made with pride in the USA using patented technology
