PR-32-4001-DMC-WAVE

Praxis Works
Direct Mount C MTN Wave 1x Chainring (Super Boost)

£54.00  
Was  £60.00   | Save  £6.00   (10%)

Tough enough for Enduro, Downhill, and also weight conscious for XC riding, Praxis MTN Wave™ rings are machined from 7075 T6 aluminium and hard anodized to take a beating. Licensed and developed in conjunction with Mountain Racing Products, the Wave™ pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring - going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave™ design also wears more slowly than competing designs by spreading the load over larger surface areas.

Features:

  • For Praxis Direct Mount MTB cranks or 3-Bolt SRAM MTB cranks
  • Stamped and machined manufacturing with hard black anodizing for durability
  • Wave™ Tech alternating tooth profile for better chain retention

Specification:

  • For Praxis Direct Mount MTB cranks or 3-Bolt SRAM MTB cranks.
  • 28, 30, 32, 34, 36T | 7075-T6 - See guide for DMA/DMB chain lines!
  • Wave™ Tech alternating tooth profile for better chain retention.
  • 10/11sp Shimano/SRAM | 12sp SRAM Compatible.
  • Stamped and machined manufacturing with hard black anodizing for durability.
  • REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2.
  • In very rough terrain, or just for pure security, we still recommend use of an upper guide.

Tough enough for Enduro, Downhill, and also weight conscious for XC riding, Praxis MTN Wave™ rings are machined from 7075 T6 aluminium and hard anodized to take a beating. Licensed and developed in conjunction with Mountain Racing Products, the Wave™ pattern tooth profile applies alternating lateral force to each chain link to actively retain the chain to the ring - going beyond narrow/wide implementations that rely solely on friction, while allowing room for mud, debris, and grit to escape. The Wave™ design also wears more slowly than competing designs by spreading the load over larger surface areas.

Features:

  • For Praxis Direct Mount MTB cranks or 3-Bolt SRAM MTB cranks
  • Stamped and machined manufacturing with hard black anodizing for durability
  • Wave™ Tech alternating tooth profile for better chain retention

Specification:

  • For Praxis Direct Mount MTB cranks or 3-Bolt SRAM MTB cranks.
  • 28, 30, 32, 34, 36T | 7075-T6 - See guide for DMA/DMB chain lines!
  • Wave™ Tech alternating tooth profile for better chain retention.
  • 10/11sp Shimano/SRAM | 12sp SRAM Compatible.
  • Stamped and machined manufacturing with hard black anodizing for durability.
  • REAR DER- Must use a ‘CLUTCH’ type rear derailleur. Example Shimano Shadow or SRAM Type 2.
  • In very rough terrain, or just for pure security, we still recommend use of an upper guide.

Logo Line Break