The world’s most successful downhill / race pedal just got even better! Dual-chamfered edges reduce costly rock strikes, and combined with proven traction pad technology Mallet DH maximises your performance. Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform. Mallet DH are the clipless pedal of choice by most Pro World Cup riders.
The ability to set the release angle of the cleats to either 15° to 20° means you can be really active on the pedal whilst still remaining attached to the bike. The concave pedal body gives a flat pedal feel with the assurance that you are connected to the bike.
Release angle: 15° to 20°
Cleat: Premium brass cleats included
Warranty: 5 years
Weight: 479g per pair
Platform: Extruded/machined aluminium
Wings: cast stainless steel
Spring: 300 series spring stainless steel
Spindle: Forged scm435 chromoly steel
Inner bearing: igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails
Outer bearing: Enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal
Traction pins: 8mm adjustable
4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal
Extremely lightweight: pedal design is very simple with only a few key parts
Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling
Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately
crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle
WESTBROOK CYCLES DELIVERY NOTICE
FREE when you spend over £50.00 in a single order
Otherwise it's typically £3.99 per order
Delivery should be expected between 2-3 working days unless stated on product page.
Approximately 4-10 working days depending on country
via Parcelforce Signed Delivery (fully traceable service). Please add items to the basket to calculate delivery for desired country.
If your country isn't listed for delivery at checkout please contact us.
Delivery of Bikes
We ship all our bikes free of charge within the United Kingdom (excl. Jersey and the Channel Islands at this time) and all our bikes come pre-assembled with just a few tweaks required (Please see our Bike Build Instruction page for details of assembly required).
All our bikes undergo a safety check before being re-boxed for shipping which can during busy periods take a little longer to complete so whilst we aim to ship all our bikes within two working days of the order please allow for additional time for this process.
All our consignments irrespective of the carrier require a signature upon delivery, deliveries are typically made between 08:00 and 18:00 so please bare this in mind when choosing a delivery address.
We do try when possible to reuse packaging from our own suppliers in order to send purchased items to our customers, we ask if the packaging is still in good condition after you've received your goods then please try to use it again or recycle if not possible.