ZoomCeramicSpeed
T47/86 To Shimano 24mm Bottom Bracket
- Spread the cost over 6, 10, 12, 24 or 36 months
- 0% Finance on 6 and 10 month options
- Pay as little as 10% deposit (20% for interest free options)
- Change your repayment terms at any point
- Same day finance decision
T47 is a newer standard with the dimensions of a PF30 bottom bracket shell, but with threads substituting for a press fit. This bottom bracket allows you to install Shimano and other 24mm diameter thru-axle cranks into a T47 shell.
There are 2 versions: Standard and Coated Bearings. CeramicSpeed Bearings come installed in cups and are connected through the shell. Both have super round CeramicSpeed Balls and hardened-steel races. The CeramicSpeed Coated Bearings have an additional attribute: a 3-micron thick metallic layer over the races. This addition makes the races harder and smoother, lowering drag and increasing life.
In The Box
- 2 threaded cups with CeramicSpeed bearings installed
- 2 dust covers
- Spacer tube
- 10mm syringe of All Round Grease
- Sticker Sheet
T45 is an open standard designed to provide the benefits of both oversized shells and the tight fit of threading. These cups and bearings adapt the shell so it is compatible with 24mm diameter spindle cranks.
Our CeramicSpeed Standard Bearings reduce drag by 75% when compared to stock bottom brackets. Down to 0.3-0.4 watts per set. This is the result of hardened-steel races combined with CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. They also last longer.
The CeramicSpeed coated Bearings feature an even longer lifespan and even lower drag. Life increases by 60% and drag drops by 50% compared to our CeramicSpeed Standard Bearings.
Applied to the bearings at the factory is All Round Grease. It can be replaced for lower drag TT and Track Grease, or higher durability LongLife Grease, which adds a bit of drag but stays in when riding through messy conditions.
T47 is a newer standard with the dimensions of a PF30 bottom bracket shell, but with threads substituting for a press fit. This bottom bracket allows you to install Shimano and other 24mm diameter thru-axle cranks into a T47 shell.
There are 2 versions: Standard and Coated Bearings. CeramicSpeed Bearings come installed in cups and are connected through the shell. Both have super round CeramicSpeed Balls and hardened-steel races. The CeramicSpeed Coated Bearings have an additional attribute: a 3-micron thick metallic layer over the races. This addition makes the races harder and smoother, lowering drag and increasing life.
In The Box
- 2 threaded cups with CeramicSpeed bearings installed
- 2 dust covers
- Spacer tube
- 10mm syringe of All Round Grease
- Sticker Sheet
T45 is an open standard designed to provide the benefits of both oversized shells and the tight fit of threading. These cups and bearings adapt the shell so it is compatible with 24mm diameter spindle cranks.
Our CeramicSpeed Standard Bearings reduce drag by 75% when compared to stock bottom brackets. Down to 0.3-0.4 watts per set. This is the result of hardened-steel races combined with CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. They also last longer.
The CeramicSpeed coated Bearings feature an even longer lifespan and even lower drag. Life increases by 60% and drag drops by 50% compared to our CeramicSpeed Standard Bearings.
Applied to the bearings at the factory is All Round Grease. It can be replaced for lower drag TT and Track Grease, or higher durability LongLife Grease, which adds a bit of drag but stays in when riding through messy conditions.
