CS.BB.C.386.24.CX

CeramicSpeed
EVO386 To Shimano 24mm Gravel/CX Coated Bottom Bracket

£349.95
Colour
Finance available from £7.78 / month DEKO Finance
  • Spread the cost over 6, 10, 12, 24 or 36 months
  • 0% Finance on 6 and 10 month options
  • Pay as little as 10% deposit (20% for interest free options)
  • Change your repayment terms at any point
  • Same day finance decision
Calculate finance

The EVO386 standard is designed for oversized spindles. CeramicSpeed’s kit for Shimano allows you to install Shimano or FSA cranks with 24mm thru-axle spindles.

Our Gravel bottom brackets are built with CeramicSpeed Coated bearings and equipped with UFO Long Life Grease for the ultimate in durability and protection in all environments.

The cups come with CeramicSpeed Bearings installed, coated bearings and hardened-steel races for longer life and less bearing drag.

In The Box

  • 1 bottom bracket with bearings installed.
  • 2 dust covers.
  • CeramicSpeed Long Life Grease.
  • Sticker Sheet.

Technical Data
The design of overlapping cups extending through the shell for EVO386 reduce the likelihood of creaking and increase the reliability of the system.

Our CeramicSpeed Coated Bearings reduce drag by over 75% when compared to stock bottom brackets. Down to 0.3-0.4 watts per set. This is the result of hardened-steel races, coated with a unique non-corrosive surface finish and combined with CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition, in addition to lasting longer.

The EVO386 standard is designed for oversized spindles. CeramicSpeed’s kit for Shimano allows you to install Shimano or FSA cranks with 24mm thru-axle spindles.

Our Gravel bottom brackets are built with CeramicSpeed Coated bearings and equipped with UFO Long Life Grease for the ultimate in durability and protection in all environments.

The cups come with CeramicSpeed Bearings installed, coated bearings and hardened-steel races for longer life and less bearing drag.

In The Box

  • 1 bottom bracket with bearings installed.
  • 2 dust covers.
  • CeramicSpeed Long Life Grease.
  • Sticker Sheet.

Technical Data
The design of overlapping cups extending through the shell for EVO386 reduce the likelihood of creaking and increase the reliability of the system.

Our CeramicSpeed Coated Bearings reduce drag by over 75% when compared to stock bottom brackets. Down to 0.3-0.4 watts per set. This is the result of hardened-steel races, coated with a unique non-corrosive surface finish and combined with CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition, in addition to lasting longer.

Logo Line Break