ZoomCeramicSpeed
ITA30 30mm Bottom Bracket (Coated)
- Spread the cost over 12, 24 or 36 months
- Pay as little as 10% deposit
- Change your repayment terms at any point
- Same day finance decision
The ITA30 bottom bracket kit is an impressive bit of design. It allows you to mate a 30mm spindle crank, like those from Rotor, to a narrow 35mm diameter, 70mm wide threaded bottom bracket shell.
The bearings come installed in cups, which are then threaded into the bottom bracket shell. Those bearings are either our Standard or Coated Bearings. Both have super round, super smooth CeramicSpeed balls rolling on hardened-steel races. The Coated version has a metallic coating laid onto the races, making them even harder and smoother, resulting in longer life and lower drag.
In The Box
- 2 threaded cups with bearings installed.
- 2 1mm spacers.
- 2 0.5mm spacers.
- 2 dust covers.
- O-ring.
- All Round Grease.
- Sticker sheet.
- Spacertube.
The ITA30 bottom bracket kit is an impressive bit of design. It allows you to mate a 30mm spindle crank, like those from Rotor, to a narrow 35mm diameter, 70mm wide threaded bottom bracket shell.
The bearings come installed in cups, which are then threaded into the bottom bracket shell. Those bearings are either our Standard or Coated Bearings. Both have super round, super smooth CeramicSpeed balls rolling on hardened-steel races. The Coated version has a metallic coating laid onto the races, making them even harder and smoother, resulting in longer life and lower drag.
In The Box
- 2 threaded cups with bearings installed.
- 2 1mm spacers.
- 2 0.5mm spacers.
- 2 dust covers.
- O-ring.
- All Round Grease.
- Sticker sheet.
- Spacertube.
