ZoomCadex
GX Road Handlebars
- Spread the cost over 6, 10, 12, 24 or 36 months
- 0% Finance on 6 and 10 month options
- Pay as little as 10% deposit (20% for interest free options)
- Change your repayment terms at any point
- Same day finance decision
COMMAND CONTROL
Daredevil descending and drifting through corners. Hammering flats and grinding up steep climbs. Gravel has it all, and cockpit control is everything. With a wide 16-degree flare, extended tails and a 5-degree backsweep, plus flattened tops for hand comfort, the new CADEX GX carbon handlebar delivers smooth-riding confidence to let it rip.
CONTROL & COMPLIANCE
Progressive, gravel-ready shaping includes an extended 16-degree flare, 5-degree outsweep and 40mm tails The result is game-changing control while descending and cornering on rugged gravel terrain. The new D-shaped top section features an extended 5-degree backsweep for added compliance and comfort on long, challenging rides over rough ground.
SMOOTH TRANSITIONS
A 70mm reach makes it easy to switch from the tops to the hoods for brake lever access. And a shallow 115mm drop lets you quickly move to a lower position for aero efficiency, cornering control and confidence when bombing descents.
SUPER STRONG, ULTRA LIGHTWEIGHT
One-piece mold construction increases tensile strength and eliminates the added weight and flex found in traditionally bonded bars. Precision carbon T800 and T1100 carbon fiber lay-up further enhances weight savings, keeping the CADEX GX at an ultralight 190 grams for a 420mm bar.
FEATURES:
- 16-degree flare and 5-degree outsweep provide maximum control over rough, loose gravel and dirt
- 70mm reach and shallow 115mm drop allow quick and controlled transitions between the tops, the hoods and the drops
- D-Shaped tops add increased compliance and greater hand comfort for long rides over uneven surfaces
- 5-degree backsweep offers a more natural hand position for more comfort and balance while climbing
- Extended 40mm tails add stability and leverage in the drops for increased confidence when sprinting or descending
- One-piece, no-bond mold manufacturing with T800 and T1100 carbon lamination reinforcement offer featherweight without compromising on strength and stiffness
- Precision carbon fiber layup provides added strength and weight savings
- Compatible with Shimano Di2 Bar End Type Junction (EW-RS 910)
SPECIFICATIONS:
Material: Carbon
Clamp Diameter: 31.8mm
Width (hood to hood): 400mm / 420mm / 440mm / 460mm
Width (end to end): 466mm / 486mm / 506mm /526mm
Flare: 16 degrees
Out Sweep: 5 degrees
Back Sweep: 5 degrees
Drop:115mm
Reach: 70mm
Weight: 185g (400mm) / 190g (420mm) / 195g (440mm) / 200g (460mm)
COMMAND CONTROL
Daredevil descending and drifting through corners. Hammering flats and grinding up steep climbs. Gravel has it all, and cockpit control is everything. With a wide 16-degree flare, extended tails and a 5-degree backsweep, plus flattened tops for hand comfort, the new CADEX GX carbon handlebar delivers smooth-riding confidence to let it rip.
CONTROL & COMPLIANCE
Progressive, gravel-ready shaping includes an extended 16-degree flare, 5-degree outsweep and 40mm tails The result is game-changing control while descending and cornering on rugged gravel terrain. The new D-shaped top section features an extended 5-degree backsweep for added compliance and comfort on long, challenging rides over rough ground.
SMOOTH TRANSITIONS
A 70mm reach makes it easy to switch from the tops to the hoods for brake lever access. And a shallow 115mm drop lets you quickly move to a lower position for aero efficiency, cornering control and confidence when bombing descents.
SUPER STRONG, ULTRA LIGHTWEIGHT
One-piece mold construction increases tensile strength and eliminates the added weight and flex found in traditionally bonded bars. Precision carbon T800 and T1100 carbon fiber lay-up further enhances weight savings, keeping the CADEX GX at an ultralight 190 grams for a 420mm bar.
FEATURES:
- 16-degree flare and 5-degree outsweep provide maximum control over rough, loose gravel and dirt
- 70mm reach and shallow 115mm drop allow quick and controlled transitions between the tops, the hoods and the drops
- D-Shaped tops add increased compliance and greater hand comfort for long rides over uneven surfaces
- 5-degree backsweep offers a more natural hand position for more comfort and balance while climbing
- Extended 40mm tails add stability and leverage in the drops for increased confidence when sprinting or descending
- One-piece, no-bond mold manufacturing with T800 and T1100 carbon lamination reinforcement offer featherweight without compromising on strength and stiffness
- Precision carbon fiber layup provides added strength and weight savings
- Compatible with Shimano Di2 Bar End Type Junction (EW-RS 910)
SPECIFICATIONS:
Material: Carbon
Clamp Diameter: 31.8mm
Width (hood to hood): 400mm / 420mm / 440mm / 460mm
Width (end to end): 466mm / 486mm / 506mm /526mm
Flare: 16 degrees
Out Sweep: 5 degrees
Back Sweep: 5 degrees
Drop:115mm
Reach: 70mm
Weight: 185g (400mm) / 190g (420mm) / 195g (440mm) / 200g (460mm)
