RMBXHL218F

Box Components
Hex Lab 20" Carbon 28 Hole BMX Rim

£399.99
Size
Finance available from £7.78 / month DEKO Finance
  • Spread the cost over 6, 10, 12, 24 or 36 months
  • 0% Finance on 6 and 10 month options
  • Pay as little as 10% deposit (20% for interest free options)
  • Change your repayment terms at any point
  • Same day finance decision
Calculate finance

All Hex Lab rims are engineered to be front and rear specific and crafted using Oversized Technology. Box have carefully studied the load paths from the bars through the stem, headset, fork, axle, hub to the spokes and into the rim for steering stiffness. The same approach was taken via the pedals through the cranks and other components on the way to the rear rim for pedalling stiffness. That extra stiffness will net you more power to the ground out back, and upfront, you'll feel in control. When combined with Box's other Oversized components, you'll experience heightened responsiveness and reduced latency. Due to their compatibility with tubeless and tubed configurations, these rims have a broad range of tire options and setup possibilities, making them perfect for any track.

The Hex Lab Carbon BMX Rims are the only rims in the Box line-up to be blessed with Oversized Technology. They are also the only model to use Ultra High Modulus Carbon Fibre (stiffer than other carbons variants). Take notice of the unique Symmetrical Dihedral Angle Stabilizers. Yes, it’s a mouthful but each of those words carries meaning. The sculpted bullet-shaped spoke beds are designed to bridge the angle between the rim's angled flanks and the vertical plane. With that, we achieve the stability, stiffness, and durability of a much broader rim profile without actually taking on most of the extra material.

Features:

  • Machined Brake Track
  • High-Response & Low Latency
  • Symmetrical Dihedral Angle Stabilisers

Specification:

Material: Vacuum Mold Ultra High Modulus Carbon Fibre
Hole Drilling: 28
Seam: None
Valve Hole: Presta
Finish: Matte Black with Foil Stamped Chrome Logos
Compatibility: Tubeless-Ready
Front: Disc-only brake profile
Brake: Rear: Rim or Disc Brake
Compatible Tyre Size: 20 x 1" to 1-3/8"
Diameter: 20"
External Width: 22mm
Internal Width: 15.4mm
ERD: 427mm
ISO (E.T.R.T.O): 451mm (front and rear)
Weight: 399g/10.05oz (front and rear)

All Hex Lab rims are engineered to be front and rear specific and crafted using Oversized Technology. Box have carefully studied the load paths from the bars through the stem, headset, fork, axle, hub to the spokes and into the rim for steering stiffness. The same approach was taken via the pedals through the cranks and other components on the way to the rear rim for pedalling stiffness. That extra stiffness will net you more power to the ground out back, and upfront, you'll feel in control. When combined with Box's other Oversized components, you'll experience heightened responsiveness and reduced latency. Due to their compatibility with tubeless and tubed configurations, these rims have a broad range of tire options and setup possibilities, making them perfect for any track.

The Hex Lab Carbon BMX Rims are the only rims in the Box line-up to be blessed with Oversized Technology. They are also the only model to use Ultra High Modulus Carbon Fibre (stiffer than other carbons variants). Take notice of the unique Symmetrical Dihedral Angle Stabilizers. Yes, it’s a mouthful but each of those words carries meaning. The sculpted bullet-shaped spoke beds are designed to bridge the angle between the rim's angled flanks and the vertical plane. With that, we achieve the stability, stiffness, and durability of a much broader rim profile without actually taking on most of the extra material.

Features:

  • Machined Brake Track
  • High-Response & Low Latency
  • Symmetrical Dihedral Angle Stabilisers

Specification:

Material: Vacuum Mold Ultra High Modulus Carbon Fibre
Hole Drilling: 28
Seam: None
Valve Hole: Presta
Finish: Matte Black with Foil Stamped Chrome Logos
Compatibility: Tubeless-Ready
Front: Disc-only brake profile
Brake: Rear: Rim or Disc Brake
Compatible Tyre Size: 20 x 1" to 1-3/8"
Diameter: 20"
External Width: 22mm
Internal Width: 15.4mm
ERD: 427mm
ISO (E.T.R.T.O): 451mm (front and rear)
Weight: 399g/10.05oz (front and rear)

Logo Line Break