101365

CeramicSpeed
BB30 Bottom Bracket Bearings - Coated

£283.95  
Was  £314.95   | Save  £31.00   (10%)
Finance available from £8.73 / month DEKO Finance
  • Spread the cost over 12, 24 or 36 months
  • Pay as little as 10% deposit
  • Change your repayment terms at any point
  • Same day finance decision
Calculate finance

The BB30 bottom bracket allows you to pair 30mm spindle cranks to 42mm inner diameter bottom bracket shells. Cannondale pioneered this standard along with specially-designed cranks and many have found the benefits to them. Road versions have a 68mm width, MTB has 73mm. These are also the bearings you can use to replace bearings in PF30 cups. 

Low drag, long life super round CeramicSpeed balls installed on coated, hardened-steel races for longer life and less bearing drag.

In The Box

  • 2 bearings.
  • 2 1mm spacers
  • 2 0.5mm spacers.
  • 2 dust covers.
  • 30mm wave washer
  • 10mm syringe of grease.
  • Sticker sheet.

BB30 was designed to make the bike lighter: no cups, threading, or redundant metal, plus a lighter, stiffer crank. That’s why the crank spindle is 30mm, which was a big jump up from narrow square-taper spindles. 

CeramicSpeed standard bearings typically have frictional drag of 0.3-0.4 watts per set. That’s in the range of a 75% drag reduction compared to standard bottom brackets. That’s thanks to balls that are 100% smoother and 15% harder than the ceramic competition. The bearings last at least three times longer than other bearings.

Frame & Axle: BB30 / BB30 30mmThread: PF w/o cupsColor: BearingsMaterial: Bearings: CS 61806Crank Compatibility: Zipp, SRAM, Cannondale a.o. Bb30

The BB30 bottom bracket allows you to pair 30mm spindle cranks to 42mm inner diameter bottom bracket shells. Cannondale pioneered this standard along with specially-designed cranks and many have found the benefits to them. Road versions have a 68mm width, MTB has 73mm. These are also the bearings you can use to replace bearings in PF30 cups. 

Low drag, long life super round CeramicSpeed balls installed on coated, hardened-steel races for longer life and less bearing drag.

In The Box

  • 2 bearings.
  • 2 1mm spacers
  • 2 0.5mm spacers.
  • 2 dust covers.
  • 30mm wave washer
  • 10mm syringe of grease.
  • Sticker sheet.

BB30 was designed to make the bike lighter: no cups, threading, or redundant metal, plus a lighter, stiffer crank. That’s why the crank spindle is 30mm, which was a big jump up from narrow square-taper spindles. 

CeramicSpeed standard bearings typically have frictional drag of 0.3-0.4 watts per set. That’s in the range of a 75% drag reduction compared to standard bottom brackets. That’s thanks to balls that are 100% smoother and 15% harder than the ceramic competition. The bearings last at least three times longer than other bearings.

Frame & Axle: BB30 / BB30 30mmThread: PF w/o cupsColor: BearingsMaterial: Bearings: CS 61806Crank Compatibility: Zipp, SRAM, Cannondale a.o. Bb30

Logo Line Break