MUC20032

Muc-Off
B.A.M! (125ml)

£12.99  
Was  £15.99   | Save  £3.00   (19%)

B.A.M quickly inflates and repairs punctures at the same time by injecting latex foam and air into a tyre or tube. B.A.M is the perfect emergency backup that can be strapped to a bike frame using the new Muc-Off B.A.M Utility Belt (sold separately) or carried in a ride pack. Compatible with road, cx/gravel and MTB wheels as well as most tubeless sealants. Will inflate a 29” MTB tyre in under a minute and capable of sealing holes 3-4mm.

Features:

  • Pink Synthetic Latex foam sealant and inflation
  • Nozzle fits both Presta and Schrader valves
  • Compatible with Road, CX/Gravel and MTB wheels
  • Inflates a 29” MTB tyre & 700c Road tyre in under a minute
  • Seals holes up to 3-4mm
  • Does not contain ammonia
  • Compatible with most tubeless sealants.

Directions for use:

  • Check tyre to make sure there is nothing still inserted and carefully remove if there is
  • Check the valve and make sure its clear and open if presta check the core is not damaged by pressing it in.
  • Shake Bam can
  • Move the valve to the top of the wheel
  • Carefully insert bam nozzle over valve
  • Push up on the can with a little force ( not to hard) to release the sealant and air
  • Once inflated and up to pressure remove bam and wipe any excess foam off
  • Spin the wheel to aid coating inside. Top tip on really big hole you can use your thumb over it to help it cure

B.A.M quickly inflates and repairs punctures at the same time by injecting latex foam and air into a tyre or tube. B.A.M is the perfect emergency backup that can be strapped to a bike frame using the new Muc-Off B.A.M Utility Belt (sold separately) or carried in a ride pack. Compatible with road, cx/gravel and MTB wheels as well as most tubeless sealants. Will inflate a 29” MTB tyre in under a minute and capable of sealing holes 3-4mm.

Features:

  • Pink Synthetic Latex foam sealant and inflation
  • Nozzle fits both Presta and Schrader valves
  • Compatible with Road, CX/Gravel and MTB wheels
  • Inflates a 29” MTB tyre & 700c Road tyre in under a minute
  • Seals holes up to 3-4mm
  • Does not contain ammonia
  • Compatible with most tubeless sealants.

Directions for use:

  • Check tyre to make sure there is nothing still inserted and carefully remove if there is
  • Check the valve and make sure its clear and open if presta check the core is not damaged by pressing it in.
  • Shake Bam can
  • Move the valve to the top of the wheel
  • Carefully insert bam nozzle over valve
  • Push up on the can with a little force ( not to hard) to release the sealant and air
  • Once inflated and up to pressure remove bam and wipe any excess foam off
  • Spin the wheel to aid coating inside. Top tip on really big hole you can use your thumb over it to help it cure

Logo Line Break