Zoom
- Spread the cost over 6, 10, 12, 24 or 36 months
- 0% Finance on 6 and 10 month options
- Pay as little as 10% deposit (20% for interest free options)
- Change your repayment terms at any point
- Same day finance decision
Low-volume winter bib tights that merge targeted protection, maximum breathability, and an aerodynamic fit for riders going full gas in the coldest conditions.
The UMA GT Ultraz Winter Bib Tights are constructed with proven winterproof textiles to deliver unmatched levels of insulation, breathability, and weather resistance. We began with the same highly insulating brushed-back RX Heavy that’s used in our Winter Bib Tights, but added a second layer on the outside for added protection. For this twinDeck construction, we applied our NEOS Ultra textile an ultrathin 2L softshell with PU bonded membrane that’s water-resistant and 100% windproof to ensure this element-facing section of your legs and glutes remains protected from snow, rain, wind, and low temperatures. As with the Winter Bib Tights, RX Light makes up the backs of the legs for added breathability and comfort in this high-flex zone. The fit of the Ultraz falls into our regularFit category, which means they’re lightly compressive with their double-layer design, but not as tight as our racingFit apparel. The fabric panels flex with each pedal stroke, as they’re both pre-shaped and sewn to fully wrap and support the upper leg muscles, knees, and calves while in motion. The insert is our proven UMA EVO, featuring 8mm of plush memory foam for dependable comfort on every ride.
THE FINER DETAILS
FEATURED FABRICS
We used a combination of our ultralight 2L, membrane-equipped SPHERE Ultra backed by the more insulating brushed-back OSMOS Heavy, applied in a two-layer twinDeck construction along the knees, thighs, front, and hips. Out back we added our thicker SPHERE Medium. This fortress of lab-developed waterproof and windproof fabrics ensures you receive targeted protection throughout, without ever compromising breathability.
CONSTRUCTION/FIT
Constructed using the S9 raceFit platform, the tights employ our A-Lock Engineering framework for maximum stability and to secure the insert in place as you pedal. Our rollBar bib straps and ergoBox join forces as your weight transfers in the saddle, ensuring frictionless comfort and stability during high-output efforts.
ENGINEERING
waterBarrier: Our Geoprene outermost layer at the bottom of the leg that repels water and adheres to booties.
Carbon Xbib: A single section of elastic material folded over on itself forms a supportive A-frame that delivers limited vertical stretch in the rear. Above the “X” junction, a more flexible material is used, incorporating an antibacterial carbon weave, to wick moisture and lay flat in the front.
DWR: Treated with our Durable Water Repellent treatment to add one more level of insurance against the elements.
INSERT
DYORA RS Insert: Antibacterial microfiber booster top sheet in 3D basalt colorway. Pays homage to the lava stone that gives us strength, stability, and courage.
superAir microShock foam: A lightweight open cell foam with a shock absorbing composition that returns to its original position, filling the gap every time pedaling position is changed in the saddle through the shift of weight.
3D waffle: A patented, three-layer perforated foam that increases breathability and eliminates excess weight.
goldenGate: A patented technology that interrupts the stitching along both of the insert’s side panels, allowing a more three-dimensional freedom of movement in this sensitive, rotational area.
Low-volume winter bib tights that merge targeted protection, maximum breathability, and an aerodynamic fit for riders going full gas in the coldest conditions.
The UMA GT Ultraz Winter Bib Tights are constructed with proven winterproof textiles to deliver unmatched levels of insulation, breathability, and weather resistance. We began with the same highly insulating brushed-back RX Heavy that’s used in our Winter Bib Tights, but added a second layer on the outside for added protection. For this twinDeck construction, we applied our NEOS Ultra textile an ultrathin 2L softshell with PU bonded membrane that’s water-resistant and 100% windproof to ensure this element-facing section of your legs and glutes remains protected from snow, rain, wind, and low temperatures. As with the Winter Bib Tights, RX Light makes up the backs of the legs for added breathability and comfort in this high-flex zone. The fit of the Ultraz falls into our regularFit category, which means they’re lightly compressive with their double-layer design, but not as tight as our racingFit apparel. The fabric panels flex with each pedal stroke, as they’re both pre-shaped and sewn to fully wrap and support the upper leg muscles, knees, and calves while in motion. The insert is our proven UMA EVO, featuring 8mm of plush memory foam for dependable comfort on every ride.
THE FINER DETAILS
FEATURED FABRICS
We used a combination of our ultralight 2L, membrane-equipped SPHERE Ultra backed by the more insulating brushed-back OSMOS Heavy, applied in a two-layer twinDeck construction along the knees, thighs, front, and hips. Out back we added our thicker SPHERE Medium. This fortress of lab-developed waterproof and windproof fabrics ensures you receive targeted protection throughout, without ever compromising breathability.
CONSTRUCTION/FIT
Constructed using the S9 raceFit platform, the tights employ our A-Lock Engineering framework for maximum stability and to secure the insert in place as you pedal. Our rollBar bib straps and ergoBox join forces as your weight transfers in the saddle, ensuring frictionless comfort and stability during high-output efforts.
ENGINEERING
waterBarrier: Our Geoprene outermost layer at the bottom of the leg that repels water and adheres to booties.
Carbon Xbib: A single section of elastic material folded over on itself forms a supportive A-frame that delivers limited vertical stretch in the rear. Above the “X” junction, a more flexible material is used, incorporating an antibacterial carbon weave, to wick moisture and lay flat in the front.
DWR: Treated with our Durable Water Repellent treatment to add one more level of insurance against the elements.
INSERT
DYORA RS Insert: Antibacterial microfiber booster top sheet in 3D basalt colorway. Pays homage to the lava stone that gives us strength, stability, and courage.
superAir microShock foam: A lightweight open cell foam with a shock absorbing composition that returns to its original position, filling the gap every time pedaling position is changed in the saddle through the shift of weight.
3D waffle: A patented, three-layer perforated foam that increases breathability and eliminates excess weight.
goldenGate: A patented technology that interrupts the stitching along both of the insert’s side panels, allowing a more three-dimensional freedom of movement in this sensitive, rotational area.
