SIAMTL009ASY0101

Silca
3D Printed Ti Lock Ring Tool

£152.00  
Was  £160.00   | Save  £8.00   (5%)

The Silca 3D Printed Ti Lock Ring Tool, which has been 3D printed in hardened 6/4 titanium, is stronger than many traditional cycling tools and 4-6 times stronger than an aluminium lock ring. It has a dual spline head that works with both Shimano/SRAM and Campagnolo lockrings, as well as a handle with spiral rifle reinforcements on the inside, inspired by Columbus SLX tubing. At 45g, it’s very light, but doesn’t compromise on strength. Designed to be used on well-maintained bikes, this chain whip isn’t compatible with cheater bars.

Key features:

  • Weighs 45g
  • Shimano/SRAM compatible
  • Campagnolo compatible
  • 3D printed 6/4 Ti
  • Not cheater bar compatible
  • SILCA Shield Warranty

The Silca 3D Printed Ti Lock Ring Tool, which has been 3D printed in hardened 6/4 titanium, is stronger than many traditional cycling tools and 4-6 times stronger than an aluminium lock ring. It has a dual spline head that works with both Shimano/SRAM and Campagnolo lockrings, as well as a handle with spiral rifle reinforcements on the inside, inspired by Columbus SLX tubing. At 45g, it’s very light, but doesn’t compromise on strength. Designed to be used on well-maintained bikes, this chain whip isn’t compatible with cheater bars.

Key features:

  • Weighs 45g
  • Shimano/SRAM compatible
  • Campagnolo compatible
  • 3D printed 6/4 Ti
  • Not cheater bar compatible
  • SILCA Shield Warranty

Logo Line Break