Look 920i CR Full Suspension Frameset Black / White (2012)

Carbon Type VHM Finish 3K Construction Single-Piece Front Triangle, Carbon Rocker, Carbon Rear Triangle

Shock Absorber Dt Swiss XR Carbon

Bottom Bracket BB30 73mm

Front Derailleur Upper Collar 34.9 mm, Lower Drawing

Seatpost Clamp 31,6 mm

Headset Integrated Conical Look 1” Below, Dropouts Wrought Aluminium Replaceable Derailleur Tab And Post Mount Disc Brake Attachment 140 Or 160mm With Adapter Supplied

Bottle Hanger 1

Sizes XS- S - M - L

Frame Weight 2350 Gr. With Shock Absorber In Size S

Accessories

Bike Cover

Post Mount Adapter 140 To 160Mm,

Seatpost Syntace P6 Hiflex Carbon 31.6mm

Warranty Frameset Structural = 5 Years Paint And Finish = 1 Year (Non-Transferable)

TECNOLOGY

FULLY SUSPENDED MTB FRAME 120MM FULL CARBON

All the components of the 920 Kit Carbone are made of carbon, from the single-piece front triangle to the asymmetric rear triangle, including its rocker and its accessories (shock absorber and saddle stem), you thus fully profit of the performance level and lightness that our control of carbon procures.

• INTEGRATED A-STEM

The 920 innovates by incorporating our Direct Drive concept in its MTB version. The Direct Drive concept corresponds to the optimisation of all the steering station’s parameters in the aim of bringing maximal rigidity, reliability and safety to reach a maximum performance level. We arrive at this result through the use of a short and conical head tube 11/2” below and 11/8” above and the suppression of spacers since the adjustment of the handlebars’ height is now done through the use of our A-Stem reversible length setting the sections of which were clearly defined to optimise steering accuracy.

• SINGLE-PIVOT KINEMATICS WITH “FLEX” STAYS 120MM TRAVEL

The kinematics of the 920 is of single-pivot type with tip over rocker. The main pivot point was precisely positioned to obtain the desired rear wheel path, the geometry and the position of the rocker were subject to long hours of work and of numerous tests to obtain the shock absorption ratio curves and thus the desired progress for the work of the rear suspension, resulting in successful kinematics presenting easiness, a high level of rigidity and an exemplary behaviour.

Our experience in the use of carbon allowed us to continue further: we replaced the pivot point located on the stays by an accurately calculated flat section that allows us to do without rolling bearing axes there, the stays bend when the suspension operates offering an unequalled level of reliability. We thus obtain a laterally more rigid stays pivot point, which is easier and does not require more maintenance.

• CARBON ROCKER

The carbon rocker allows a gain of 50gr in relation to its aluminium counterpart, it is the final optimisation touch for this upper range version of the 920 on which every ounce counts.

• PROTECTIONS

Once again, LOOK has not overlooked the protection of your MTB frame, the 920 thus has our moulded metallic protection in the diagonal tube, we have added a cable guide under the bottom bracket that acts as a “shoe” as in motorcycles as well as an aluminium protection on the right base at plates level to prevent damaging the carbon in case of chain lifts.

For quality accessories for your bike take a look at our fantastic range from top manufacturer Look. Look have been producing their products since 1984. The brand has a fantastic collection of cycle frames and cycle accessories that we now feature on Westbrook Cycles. Specialising in innovation and performance, our Look cycle accessories are ideal for any avid cyclist is is after quality bike accessories.